Today, my wifi stops work! Wicd is no longer detect any wifi network!
The first thing, i check ifconfig
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
|
[kurei@axcoto ~]$
ifconfig
eth0 Link encap:Ethernet HWaddr 00:1F:16:5D:A5:01
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21f:16ff:fe5d:a501 /64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3743 errors:0 dropped:0 overruns:0 frame:0
TX packets:4386 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2778914 (2.6 Mb) TX bytes:699729 (683.3 Kb)
Interrupt:27 Base address:0xe000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1 /128
Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:7529 errors:0 dropped:0 overruns:0 frame:0
TX packets:7529 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:293591 (286.7 Kb) TX bytes:293591 (286.7 Kb)
|
Okay, no wireless card is up, check ifconfig -a
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
|
[kurei@axcoto ~]$
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1F:16:5D:A5:01
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21f:16ff:fe5d:a501 /64
Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3771 errors:0 dropped:0 overruns:0 frame:0
TX packets:4421 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2785823 (2.6 Mb) TX bytes:711472 (694.7 Kb)
Interrupt:27 Base address:0xe000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1 /128
Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:7529 errors:0 dropped:0 overruns:0 frame:0
TX packets:7529 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:293591 (286.7 Kb) TX bytes:293591 (286.7 Kb)
vboxnet0 Link encap:Ethernet HWaddr 0A:00:27:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:24:2B:17:2E:2F
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
|
So, everything’s good!
I tried to make it up!
1
2
3
|
[kurei@axcoto ~]$ [kurei@axcoto ~]$
sudo ifconfig
wlan0 up
Password: SIOCSIFFLAGS: Operation not possible due to RF- kill
|
Shame on me, i even don’t know what RF-kill is!
Okay, i do a google and found rfkill! Install it
Then check :
1
2
3
4
5
6
7
|
[kurei@axcoto ~]$ rfkill list
0: hp-wifi: Wireless LAN
Soft blocked:
yes
Hard blocked:
yes
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked:
yes
|
i found that Hard blocked is when you turn off wifi button on laptop!
Soft blocked seems come from something like driver/module…I don’t know!
Any way, unblock it!
1
2
|
[kurei@axcoto ~]$
sudo rfkill unblock 0
[kurei@axcoto ~]$
sudo rfkill unblock 1
|
And now, wlan up just work fine
1
|
[kurei@axcoto ~]$
sudo ifconfig
wlan0 up
|
Next, i restart system! Ooops, it get soft blocked again after reboot!
So, i guess need some flag in booting process to let system know that don’t block it!
Google is friend, i found need to add
1
|
options ath_pci rfkill=0 |
to /etc/modprobe.d/modprobe.conf
Okay, reboot, work!
WiCD can’t detect wireless network now!
相关推荐
ubuntu 下破解无线网卡 ubuntu 下破解无线网卡
UBUNTU12.4 安装磊科无线网卡驱动
ubuntu16.04 无线网卡设备:ath9k ;无线网卡和有线网卡桥接,且无线网卡做AP;在第四点中,开启hostapd 服务的命令应该为:hostapd -B /etc/hostapd/hostapd.conf;服务开启前需要结束无线的有关进程,比如我遇到的...
问题描述:error: redefinition of ‘struct sha256_state’ ...系统:Ubuntu Kylin 20.04 LTS Pro 内核:Linux **** 5.10.0-1044-oem #46-Ubuntu SMP Wed Aug 11 09:50:57 UTC 2021...USB无线网卡:绿联 CM448 RTL8811CU
Ubuntu中将带无线网卡的电脑作WIFI热点的方法
Ubuntu如何安装无线网卡驱动方法.docx
=======这是驱动文件======= ubuntu thinkpad E540安装无线网卡wireless-RTL8723BE的方法. make sudo make install sudo modprobe rtl8723be sudo modprobe -r rtl8723be sudo modprobe rtl8723be
Ubuntu9.10中博通无线网卡驱动程序,下载后解压缩到/var/cache/apt/archives目录下,依次双击安装b43-fwcutter*,fakeroot*,patch*,dkms*,bcmwl*,然后重启计算机,检测到网卡驱动,进行连接即可。
macbook及其他安装有BCM无线网卡的笔记本,安装UBUNTU后无法上网的解决办法
新主板ubuntu18.04 LTS系统线网卡安装方法,需下载已大包好的gcc、make、build-essential、r8125
联想E46A Ubuntu下配置Broadcom无线网卡
在Ubuntu中安装DELL无线网卡的方法 先下载驱动程序: download and extract http://ftp.us.dell.com/network/R174291.exe
2.ubuntu下切换到root:sudo -i 3.解压网卡驱动tar -xzvf e1000e-3.3.4.tar.gz 4.cd e1000e-3.3.4/src 5.编译安装:make install,将编译好的驱动(e1000e.ko)安装到/lib/modules/3.16.0-30-generic/updates/...
折腾ubuntu的系统,无法识别网卡的解决方式 1、用外置网卡安装 2、用离线文件进行安装 很方便的解决方式,自己首次还加了个几十块钱的网卡
Ubuntu18.04升级内核并安装AX210无线网卡驱动
ubuntu下killer 1650i无线网卡无法识别修复工具,需要配合博客使用,https://blog.csdn.net/qq_42668426/article/details/108530083
开始我按照上面的步骤很快就装好了,但是一启用无线网卡,过会就死机,当我搞了一个多星期快放弃的时候,才发现原来安装ieee80211的最新版本才有这个问题,我也是把几个模块的所有版本都试过来才发现的,请大家...
ubuntu 无法使用无线网卡问题,在thinkpad E420 装ubuntu 无法使用无线网卡问题在thinkpad E420 装ubuntu 无法使用无线网卡问题
1. 插入无线网卡,通过命令:iwconfig 查看无线网卡是否存在。 这里无线网卡为wlan1 2.启用无线网卡:sudo ifconfig wlan1 up 3.自动连接路由器配置:使用wpa_passphrase “essid” “key” 命令得到的内容添加...
ubuntu11.10安装完成后无线不能使用解决办法 亲测有效(ubuntu 13.10之后未测试)